Monroe Max-Air shock table

Type 1 Ball Joint Front (S4 & L/LS Fitting) 13 Models

Part No Fitting Compressed Extended Travel

MA700 S4 L1/CP3 12.750 + 21.375 = 8.625

MA711 S4 LS14 11.875 + 19.625 = 7.750

MA726 S4 LS38 12.250 + 19.750 = 7.500

MA750 LS39 S4 11.625 + 18.875 = 7.250

MA756 S4 LS17 10.250 + 16.375 = 6.125

MA777 S4 LS26 12.500 + 20.500 = 8.000

MA793 S4 LS26 14.250 + 23.750 = 9.500

MA802 L1 S4 11.375 + 18.125 = 6.750

MA805 S4 L1/CP4 12.750 + 19.500 = 6.750

MA809 S4 LS7 14.250 + 21.500 = 7.250

MA810 S4 L1/CP3 12.375 + 20.500 = 8.125

MA811 S4 LS4 13.625 + 22.250 = 8.625

MA815 S4 L1/CP3 12.250 + 19.875 = 7.625

Link Pin Front & Type 1 Rear (L/LS & L/LS Fitting) 30 Models

Part No Fitting Compressed Extended Travel

MA704 L2 L2 13.125 + 21.250 = 8.125

MA727 L1 L1 12.750 + 20.375 = 7.625

MA728 L1/CP5 L1/CP3 14.250 + 23.375 = 9.125

MA730 L1 LS38 12.875 + 21.000 = 8.125

MA733 LS39 L2 15.500 + 26.250 = 10.750

MA743 L1/CP5 LS47 14.000 + 23.000 = 9.000

MA746 LS38 LS39 13.125 + 21.000 = 7.875

MA757 LS39 L2 13.875 + 22.500 = 8.625

MA758 LS74 LS74 14.125 + 23.000 = 8.875

MA768 LS28 LS26 12.000 + 18.500 = 6.500

MA769 L1 LS26 14.125 + 22.875 = 8.750

MA770 L1 LS26 15.875 + 26.375 = 10.500

MA771 L1 LS26 14.125 + 22.875 = 8.750 

MA772 L1 LS26 15.000 + 24.750 = 9.750

MA773 L1 LS26 13.500 + 21.750 = 8.250

MA774 L3 LS43 13.500 + 21.250 = 7.750

MA775 L1 LS26 15.500 + 25.750 = 10.250

MA784 LS7 LS7 13.375 + 21.500 = 8.125

MA785 LS14 LS53 9.500 + 14.000 = 4.500

MA791 LS83 LS28 15.125 + 22.375 = 7.250

MA792 L1 L1 13.000 + 21.250 = 8.250

MA803 LS23 LS30 10.500 + 16.125 = 5.625

MA812 L1 L1 12.750 + 20.750 = 8.000

MA813 LS7 LS7 14.125 + 22.875 = 8.750

MA814 LS32 LS32 12.000 + 18.375 = 6.375

MA817 LS40 LS40 12.750 + 20.875 = 8.125

MA818 L3 LS43 14.875 + 23.625 = 8.750

MA820 L1 L1 14.375 + 23.000 = 8.625

MA824 LS26 LS26 12.750 + 20.125 = 7.375

MA826 LS12 LS42 11.000 + 16.000 = 5.000

Tagged , . Bookmark the permalink.

3 Responses to Monroe Max-Air shock table

  1. Andrei says:

    The minimum and maximum size is up to the site of attachment?

    • Bevan Johnson says:

      This data is directly from Monroe. I have to assume for the linkpin shocks it is measured between the center of the two mounting eyes and the ball joint shocks are measured from the mounting eye to the bottom of the top mounting pin. Obviously this can be changed slightly by the thickness of the rubber bush used on the pin.

  2. Andrei says:

    thanks for the info

Leave a Reply

Your email address will not be published. Required fields are marked *